CHAO Long, QIN Chen, CHEN Fan, CAO Wenhong, HUANG Guoming, XIA Ming, ZHOU Changyu, HE Xiaohua. Investigation on fatigue crack growth behavior of mixed mode Ⅰ-Ⅱ crack in 4130X steel[J]. IRON STEEL VANADIUM TITANIUM, 2025, 46(3): 195-204. doi: 10.7513/j.issn.1004-7638.2025.03.027
Citation: CHAO Long, QIN Chen, CHEN Fan, CAO Wenhong, HUANG Guoming, XIA Ming, ZHOU Changyu, HE Xiaohua. Investigation on fatigue crack growth behavior of mixed mode Ⅰ-Ⅱ crack in 4130X steel[J]. IRON STEEL VANADIUM TITANIUM, 2025, 46(3): 195-204. doi: 10.7513/j.issn.1004-7638.2025.03.027

Investigation on fatigue crack growth behavior of mixed mode Ⅰ-Ⅱ crack in 4130X steel

doi: 10.7513/j.issn.1004-7638.2025.03.027
  • Received Date: 2024-07-16
  • Publish Date: 2025-06-30
  • To investigate the behavior of mixed mode I-II fatigue crack growth in 4130X steel, Compact Tension Shear (CTS) specimens were used to conduct experimental methods and Finite Element Method (FEM) at diverse load ratios and loading angles. The results indicate that the fatigue crack growth path is not influenced by the load ratio (R), but a significant deflection angle occurs with an increase in the loading angle (β). The crack growth angles are consistent with the Maximum Tangential Stress (MTS) criterion. The fatigue crack growth rate (FCGR) shows an increasing trend as load ratio (R) increases, but decreases with an increase of the loading angle (β). With the increment of the loading angle, the morphology of the monotonic plastic zone at the crack tip varies, and the plastic strain energy is accumulated gradually. Fracture morphology analysis reveals that the load ratio (R) and loading angle (β) have a significant impact on the fatigue striations and secondary cracks at the fracture surface.
  • [1]
    LI J, BO K, HUANG Q H, et al. Development trend and challenges of high-pressure hydrogen transportable pressure vessel[J]. Acta Energiae Solaris Sinica, 2022,43(3):20-26. (李军, 薄柯, 黄强华, 等. 高压氢气储运移动式压力容器发展趋势与挑战[J]. 太阳能学报, 2022,43(3):20-26.

    LI J, BO K, HUANG Q H, et al. Development trend and challenges of high-pressure hydrogen transportable pressure vessel[J]. Acta Energiae Solaris Sinica, 2022, 43(3): 20-26.
    [2]
    NIBUR K A, MARCHI C S, SOMERDAY B P. Fracture and fatigue tolerant steel pressure vessels for gaseous hydrogen. In: ASME PVP, 2010: 18-22.
    [3]
    DING F, ZHAO T W, JIANG Y. A study of fatigue crack growth with changing loading direction[J]. Engineering Fracture Mechanics, 2006,74(13):2014-2029.
    [4]
    LUO P F, WANG C H. An experimental study on the elastic-plastic fracture in aductile material under mixed-mode loading[J]. Strain, 2008,44(3):8.
    [5]
    LIU X G, ZHU X L, GUO H D. Experimental and simulation study on Ⅰ-Ⅱ mixed-mode fatigue crack growth of TC4-DTelded joint[J]. Journal of Aeronautical Materials, 2020,40(2):61-69. (刘小刚, 朱笑林, 郭海丁. TC4-DT焊接接头Ⅰ-Ⅱ复合型疲劳裂纹扩展实验及模拟研究[J]. 航空材料学报, 2020,40(2):61-69.

    LIU X G, ZHU X L, GUO H D. Experimental and simulation study on Ⅰ-Ⅱ mixed-mode fatigue crack growth of TC4-DTelded joint[J]. Journal of Aeronautical Materials, 2020, 40(2): 61-69.
    [6]
    QIAN J, FATEMI A. Mixed mode fatigue crack growth: a literature survey[J]. Engineering fracture mechanics, 1996,55(6):969-990. doi: 10.1016/S0013-7944(96)00071-9
    [7]
    RICHARD HA, SCHRAMM B, SCHIRMEISEN N. Cracks on mixed mode loading-theories, experiments, simulations[J]. International journal of fatigue, 2014,62:93-103. doi: 10.1016/j.ijfatigue.2013.06.019
    [8]
    SANDER M, RICHARD H. Experimental and numerical investigations on the influence of the loading direction on the fatigue crack growth[J]. Int J Fatigue, 2006,28:583-591. doi: 10.1016/j.ijfatigue.2005.05.012
    [9]
    LIU J Y, WEN J, ZHAO J Y, et al. Fatigue crack growth behavior of CP-Ti cruciform specimens with mixed mode I-II crack under biaxial loading[J]. Materials, 2022,15(5):1926-1926. doi: 10.3390/ma15051926
    [10]
    LI Y F, TAO H L, GAO Q, et al. Parametric simulation method for 3-D non-planar crack propagation[J]. Journal of Aerospace Power, 2017,32(12):2888-2895. (李宇飞, 陶海亮, 高庆, 等. 三维平面裂纹扩展参数化模拟方法[J]. 航空动力学报, 2017,32(12):2888-2895.

    LI Y F, TAO H L, GAO Q, et al. Parametric simulation method for 3-D non-planar crack propagation[J]. Journal of Aerospace Power, 2017, 32(12): 2888-2895.
    [11]
    JIANG B, CHEN G, ZHAO H, et al. Fatigue propagation behavior of mixed mode crack in wheel steel[J]. Iron and Steel, 2018,53(12):100-104. (江波, 陈刚, 赵海. 中碳车轮钢复合型裂纹疲劳扩展行为[J]. 钢铁, 2018,53(12):100-104.

    JIANG B, CHEN G, ZHAO H, et al. Fatigue propagation behavior of mixed mode crack in wheel steel[J]. Iron and Steel, 2018, 53(12): 100-104.
    [12]
    ZHAO X, NIE K, ZHU T, et al. An equivalent model of mixed-mode crack to predict the fatigue growth characteristics[J]. Chinese Journal of Solid Mechanics, 2018,39(3):296-304. (赵翔, 聂凯, 朱涛, 等. 描述复合型疲劳裂纹扩展路径的等效模型[J]. 固体力学学报, 2018,39(3):296-304.

    ZHAO X, NIE K, ZHU T, et al. An equivalent model of mixed-mode crack to predict the fatigue growth characteristics[J]. Chinese Journal of Solid Mechanics, 2018, 39(3): 296-304.
    [13]
    DONG H R, GUO W L, XU F. Numerical analysis of three-dimensional Ⅰ/Ⅱ mixed-mode elastic-plastic fracture of aeronautical structural aluminum alloy[J]. Journal of Mechanical Strength, 2003, 25(2): 222-226. (董蕙茹, 郭万林, 徐绯. LC4CS铝合金三维复合型断裂的试验研究[J]. 机械强度, 2003, 25(2): 222-226.

    DONG H R, GUO W L, XU F. Numerical analysis of three-dimensional Ⅰ/Ⅱ mixed-mode elastic-plastic fracture of aeronautical structural aluminum alloy[J]. Journal of Mechanical Strength, 2003, 25(2): 222-226.
    [14]
    Ma S X, HU H, The mixed-mode propagation of fatigue crack in CTS specimen[J]. Chinese Journal of Theoretical and Applied Mechanics, 2006, 38(5): 698-704. (马世骧, 胡泓. CTS试件中复合型疲劳裂纹扩展[J]. 力学学报, 2006, 38(5): 698-704.

    Ma S X, HU H, The mixed-mode propagation of fatigue crack in CTS specimen[J]. Chinese Journal of Theoretical and Applied Mechanics, 2006, 38(5): 698-704.
    [15]
    ZHANG P, ZHOU C Y, XIE L Q, et al. Numerical investigation of mechanical behavior of crack tip under mode I and I-II mixed mode fatigue loading at negative load ratios. Theor Appl Fract Mech, 2020, 108: 102673.
    [16]
    WANG Q, LIU X, WANG W. Mixed mode fatigue crack growth behavior of Ni-Cr-Mo-V high strength steel weldments[J]. Int J Fatigue, 2017,102:79-91. doi: 10.1016/j.ijfatigue.2017.05.001
    [17]
    ZHANG P, XIE L Q, ZHOU C Y, et al. Experimental and numerical investigation on fatigue crack growth behavior of commercial pure titanium under I-II mixed mode loading at negative load ratios[J]. Int J Fatigue, 2020,138:105700. doi: 10.1016/j.ijfatigue.2020.105700
    [18]
    Chaboche J L. Time-independent constitutive theories for cyclic plasticity[J]. Int J Plast, 1986,2:149-188. doi: 10.1016/0749-6419(86)90010-0
    [19]
    SONG Y Q, LI X S, LI M. Ⅰ-Ⅱ mixed-mode fatigue crack propagation of A7085 aluminum alloy and its numerical simulation[J]. Chinese Journal of Engineering, 2018,40(12):1510-1517. (宋彦琦, 李向上, 李名. A7085铝合金Ⅰ-Ⅱ复合型疲劳裂纹扩展及其数值模拟[J]. 工程科学学报, 2018,40(12):1510-1517.

    SONG Y Q, LI X S, LI M. Ⅰ-Ⅱ mixed-mode fatigue crack propagation of A7085 aluminum alloy and its numerical simulation[J]. Chinese Journal of Engineering, 2018, 40(12): 1510-1517.
    [20]
    ROZUMEK D, MACHA E. A survey of failure criteria and parameters in mixed-mode fatigue crack growth[J]. Mater Sci, 2009,45:190-210. doi: 10.1007/s11003-009-9179-2
    [21]
    SHAHANI A R, TABATABAEI S A. Effect of T-stress on the fracture of a four-point bend specimen[J]. Mater Design, 2009,30:2630-2635. doi: 10.1016/j.matdes.2008.10.031
    [22]
    ERDOGA F. On the crack extension in plates under plane loading and transverse shear[J]. J Basic Eng Trans ASME, 1963, 85.
    [23]
    TANAKA K. Fatigue crack propagation from a crack inclined to the cyclic tensile axis[J]. Eng Fract Mech, 1974,6:493-507. doi: 10.1016/0013-7944(74)90007-1
    [24]
    RICARDS C E, LINDLEY T C. The influence of stress intensity and microstructure on fatigue crack propagation in ferritic materials[J] Eng Fract Mech, 1972, 4: 951-978.
  • Relative Articles

  • Created with Highcharts 5.0.7Amount of accessChart context menuAbstract Views, HTML Views, PDF Downloads StatisticsAbstract ViewsHTML ViewsPDF Downloads2024-082024-092024-102024-112024-122025-012025-022025-032025-042025-052025-062025-0702.557.51012.5
    Created with Highcharts 5.0.7Chart context menuAccess Class DistributionFULLTEXT: 17.6 %FULLTEXT: 17.6 %META: 64.7 %META: 64.7 %PDF: 17.6 %PDF: 17.6 %FULLTEXTMETAPDF
    Created with Highcharts 5.0.7Chart context menuAccess Area Distribution其他: 100.0 %其他: 100.0 %其他

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(18)  / Tables(6)

    Article Metrics

    Article views (10) PDF downloads(3) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return