Effect of annealing process on microstructure and properties of 2Cr12Ni4Mo3VNbN blade steel

Cao Chenxing; Xin Ruishan; Yu Zhanyang; Li Xiaokai; He Yudong; Yao Bin; Wang Liwei; He Yi

doi:10.7513/j.issn.1004-7638.2024.06.022

Volume 45 Issue 6

Dec. 2024

Turn off MathJax

Article Contents

Abstract

References

Article Navigation > IRON STEEL VANADIUM TITANIUM > 2024 > 45(6): 167-171

Cao Chenxing, Xin Ruishan, Yu Zhanyang, Li Xiaokai, He Yudong, Yao Bin, Wang Liwei, He Yi. Effect of annealing process on microstructure and properties of 2Cr12Ni4Mo3VNbN blade steel[J]. IRON STEEL VANADIUM TITANIUM, 2024, 45(6): 167-171. doi: 10.7513/j.issn.1004-7638.2024.06.022

Citation:

Cao Chenxing, Xin Ruishan, Yu Zhanyang, Li Xiaokai, He Yudong, Yao Bin, Wang Liwei, He Yi. Effect of annealing process on microstructure and properties of 2Cr12Ni4Mo3VNbN blade steel[J]. IRON STEEL VANADIUM TITANIUM, 2024, 45(6): 167-171. doi: 10.7513/j.issn.1004-7638.2024.06.022

Citation:

Cao Chenxing, Xin Ruishan, Yu Zhanyang, Li Xiaokai, He Yudong, Yao Bin, Wang Liwei, He Yi. Effect of annealing process on microstructure and properties of 2Cr12Ni4Mo3VNbN blade steel[J]. IRON STEEL VANADIUM TITANIUM, 2024, 45(6): 167-171. doi: 10.7513/j.issn.1004-7638.2024.06.022

PDF( 3199 KB)

Effect of annealing process on microstructure and properties of 2Cr12Ni4Mo3VNbN blade steel

doi: 10.7513/j.issn.1004-7638.2024.06.022

1.
Ansteel Beijing Research Institute Co., Ltd., Beijing 102211, China
2.
Pangang Group Jiangyou Changcheng Speical Steel Co., Ltd., Jiangyou621700, Sichuan , China

Received Date: 2023-12-08
Available Online: 2024-12-30
Publish Date: 2024-12-30

Abstract

Abstract

In order to solve the problem of high annealing hardness of 2Cr12Ni4Mo3VNbN industrial bar, the effects of different annealing processes on the microstructure and hardness of 2Cr12Ni4Mo3VNbN blade steel were systematically studied. The results show that compared with two-phase zone heating annealing and incomplete annealing, complete annealing has better annealing effect, the hardness is the lowest after annealing, and the hardness can be further reduced by furnace cooling. The two-stage annealing and three-stage annealing can improve structure uniformity and significantly reduce the hardness. The multi-stage annealing process is better than the one-stage annealing and two-stage annealing with regards to hardness reduction through annealing.
- blade steel,
- annealing temperature,
- annealing time,
- multi-stage annealing

FullText(HTML)

References(12)

References

[1]	Zhang Wei, Ni Jinfei, You Jin, et al. Analysis on cracking cause of 1Cr12Ni3Mo2VN stainless steel blade in low pressure rotor of steam turbine[J]. Material Protection, 2022,55(4):203-209. (张炜, 倪进飞, 尤晋, 等. 汽轮机低压转子1Cr12Ni3Mo2VN不锈钢叶片的开裂原因分析[J]. 材料保护, 2022,55(4):203-209. Zhang Wei, Ni Jinfei, You Jin, et al. Analysis on cracking cause of 1Cr12Ni3Mo2VN stainless steel blade in low pressure rotor of steam turbine[J]. Material Protection, 2022, 55（4）: 203-209.
[2]	Zeng Xiao, Zhao Jiqing, Gan Guoyou, et al. Influence of isothermal annealing on microstructure homogenization of COST-FB2 steel[J]. Heat Treatment of Metals, 2018,43(3):128-134. (曾骁, 赵吉庆, 甘国友, 等. 等温退火对COST-FB2钢组织均匀化的影响[J]. 金属热处理, 2018,43(3):128-134. Zeng Xiao, Zhao Jiqing, Gan Guoyou, et al. Influence of isothermal annealing on microstructure homogenization of COST-FB2 steel[J]. Heat Treatment of Metals, 2018, 43（3）: 128-134.
[3]	Wang Gangjian. Study on anneal process and anneal hardness of 1~2Cr13[J]. Special Steel Technology, 2011,17(1):28-30. (王刚健. 1~2Cr13退火工艺操作与退火硬度的研究[J]. 特钢技术, 2011,17(1):28-30. Wang Gangjian. Study on anneal process and anneal hardness of 1～2Cr13[J]. Special Steel Technology, 2011, 17（1）: 28-30.
[4]	Du Simin. Effect of annealing on microstructure and hardness of ultra-high strength low alloy bainitic steel[J]. Iron Steel Vanadium Titanium, 2020,41(5):130-135. (杜思敏. 退火工艺对低合金超高强度贝氏体钢组织和硬度的影响[J]. 钢铁钒钛, 2020,41(5):130-135. Du Simin. Effect of annealing on microstructure and hardness of ultra-high strength low alloy bainitic steel[J]. Iron Steel Vanadium Titanium, 2020, 41（5）: 130-135.
[5]	Lu Qianqian, Gu Hairong, Cui Lei, et al. Effect of annealing temperature on microstructure, mechanical properties and retained austenite of 1 000 MPa Q&P steel[J]. Iron Steel Vanadium Titanium, 2020,41(6):130-134. (卢茜倩, 谷海容, 崔磊, 等. 退火温度对1000 MPa级Q&P钢组织性能及残余奥氏体的影响[J]. 钢铁钒钛, 2020,41(6):130-134. Lu Qianqian, Gu Hairong, Cui Lei, et al. Effect of annealing temperature on microstructure, mechanical properties and retained austenite of 1 000 MPa Q&P steel[J]. Iron Steel Vanadium Titanium, 2020, 41（6）: 130-134.
[6]	Peng Tao, Zhao Jiqing, Cao Jianchun, et al. Influence of annealing process on hardness and microstructure of AMS 6308 steel[J]. Journal of Iron and Steel Research, 2016,28(4):58-63. (彭涛, 赵吉庆, 曹建春, 等. 退火工艺对AMS 6308钢硬度及组织的影响[J]. 钢铁研究学报, 2016,28(4):58-63. Peng Tao, Zhao Jiqing, Cao Jianchun, et al. Influence of annealing process on hardness and microstructure of AMS 6308 steel[J]. Journal of Iron and Steel Research, 2016, 28（4）: 58-63.
[7]	Yan Fuyao, Zhu Lei, Chen Hongtao, et al. Annealing process and stacking method for reducing hardness of as rolled/forged high quality special steel[J]. Iron Steel Vanadium Titanium, 2021,42(2):152-160. (闫扶摇, 朱磊, 陈宏涛, 等. 轧/锻态高品质特殊钢退火软化工艺与布料方式[J]. 钢铁钒钛, 2021,42(2):152-160. Yan Fuyao, Zhu Lei, Chen Hongtao, et al. Annealing process and stacking method for reducing hardness of as rolled/forged high quality special steel[J]. Iron Steel Vanadium Titanium, 2021, 42（2）: 152-160.
[8]	Yang Gang, Xie Xuelin, Liu Xinquan, et al. Investigation on annealing practice of 1Cr12Ni3Mo2VN heat-resistant steel[J]. Journal of Iron and Steel Research, 2010,22(3):23-28. (杨钢, 谢学林, 刘新权, 等. 1Cr12Ni3Mo2VN耐热钢退火工艺研究[J]. 钢铁研究学报, 2010,22(3):23-28. Yang Gang, Xie Xuelin, Liu Xinquan, et al. Investigation on annealing practice of 1Cr12Ni3Mo2VN heat-resistant steel[J]. Journal of Iron and Steel Research, 2010, 22（3）: 23-28.
[9]	Gao Yuan, Xi Shengqi, Wang Hong, et al. Microstructure and fatigue properties of 2Cr12Ni4Mo3VNbN new blade steel after high frequency quenching[J]. Transactions of Materials and Heat Treatment, 2020,41(2):75-81. (高圆, 席生岐, 王虹, 等. 2Cr12Ni4Mo3VNbN新型叶片钢高频淬火后的显微组织与疲劳性能[J]. 材料热处理学报, 2020,41(2):75-81. Gao Yuan, Xi Shengqi, Wang Hong, et al. Microstructure and fatigue properties of 2Cr12Ni4Mo3VNbN new blade steel after high frequency quenching[J]. Transactions of Materials and Heat Treatment, 2020, 41（2）: 75-81.
[10]	Liu Shuai, Lü Zhiqing, Zhao Jiqing, et al. Thermodynamic calculation and experimental analysis on equilibrium precipitates phase in 2Cr12Ni4Mo3VNbN steel[J]. Iron & Steel, 2022,57(5):129-136. (刘帅, 吕知清, 赵吉庆, 等. 2Cr12Ni4Mo3VNbN钢中析出相的热力学计算与试验分析[J]. 钢铁, 2022,57(5):129-136. Liu Shuai, Lü Zhiqing, Zhao Jiqing, et al. Thermodynamic calculation and experimental analysis on equilibrium precipitates phase in 2Cr12Ni4Mo3VNbN steel[J]. Iron & Steel, 2022, 57（5）: 129-136.
[11]	Yu Cansheng, Zhang Longchao, Zheng Zhiwang, et al. Effect of annealing temperature on microstructure and mechanical properties of vanadium microalloyed 780 MPa cold rolled dual phase steel[J]. Iron Steel Vanadium Titanium, 2021,42(5):158-163. (余灿生, 张龙超, 郑之旺, 等. 退火温度对钒微合金化780 MPa级冷轧双相钢组织性能的影响[J]. 钢铁钒钛, 2021,42(5):158-163. Yu Cansheng, Zhang Longchao, Zheng Zhiwang, et al. Effect of annealing temperature on microstructure and mechanical properties of vanadium microalloyed 780 MPa cold rolled dual phase steel[J]. Iron Steel Vanadium Titanium, 2021, 42（5）: 158-163.
[12]	Zeng Xiao, Zhao Jiqing, Gan Guoyou, et al. Influence of annealing process on hardness and microstructure of COST- FB2 steel[J]. Heat Treatment of Metals, 2017,42(10):75-80. (曾骁, 赵吉庆, 甘国友, 等. 退火工艺对COST-FB2钢组织和硬度的影响[J]. 金属热处理, 2017,42(10):75-80. Zeng Xiao, Zhao Jiqing, Gan Guoyou, et al. Influence of annealing process on hardness and microstructure of COST- FB2 steel[J]. Heat Treatment of Metals, 2017, 42（10）: 75-80.