Investigative Test of Iron Separation Process of a Panzhihua Lower Grade Vanadium-bearing Titanomagnetite Ore
-
摘要: 探索了攀枝花矿区某极贫钒钛磁铁矿的破碎、球磨、磁选工艺。对破碎后全矿磨选工艺,以及破碎后预磁选抛尾、预选精矿磨选工艺进行了试验。结果表明,通过三次破碎,可将平均含铁17.79%、块度500~30 mm的原矿,破碎到25 mm以下;破碎后物料全部磨选或经预磁选抛尾后磨选,可获得含铁56%以上的铁精矿;预磁选可将入磨选品位提高到19.57%、物料量降低33.54%。Abstract: Investigative test of iron separation process of a kind of Panzhihua lower grade vanadium-bearing titanomagnetite ore,including crushing,grinding and magnetic separation were carried out.Two options were tested:（a） treat the ore by grinding and magnetic separation after crushing;（b） enrich the ore by pre-magnetic separation after crushing,then treat the concentrate by grinding and magnetic separation.The results show that the ore with average iron content of 17.79% can be crushed from 500~30 mm to 25 mm below by three steps of crushing;then it can be grinded and separated,or pre-magnetic separated before grinding and separation to obtain concentrate with iron content higher than 56%.In the case of pre-magnetic separation,iron content of the ore before grinding and separation can be increased to 19.57% with amount of material consumption reduced by 33.54%.
-
点击查看大图
计量
- 文章访问数: 70
- HTML全文浏览量: 19
- PDF下载量: 1
- 被引次数: 0
下载:
