Influence of Nano-TiO2 Content on Properties ofSEBS/TiO2 Composites
-
摘要: 以纳米二氧化钛为抑菌剂,使用表面改性剂改善纳米二氧化钛与SEBS的相容性,制备出具有特殊用途的SEBS/TiO2纳米复合材料,并考察了TiO2添加量对复合材料力学性能的影响。采用SEM表征纳米二氧化钛在SEBS中的分散性能;采用黄色指数间接评价材料的抑菌性能。研究表明:随TiO2表面改性剂用量的增加,SEBS/TiO2纳米复合材料的拉伸强度、伸长率、抑菌性能呈先增加后减少趋势;随TiO2含量的增加,SEBS/TiO2纳米复合材料的拉伸强度、伸长率、黄色指数均不同程度增加。表面改性剂和纳米TiO2用量均为4%时,SEBS/TiO2纳米复合材料的黄色指数最高能达到27,即材料的抑菌性能最佳,此时也可以达到很好的力学性能。Abstract: With the use of nano-titanium dioxide as bacteriostat and surface modifier improving the compatible capability between nano-TiO2 and SEBS, the SEBS/TiO2 nano-composites with special use were prepared and the influence of TiO2 dosage on composite properties was also researched.The dispersed performance of nano-TiO2 in SEBS was characterized with SEM and its bacteriostasis performance was measured with yellow index.The result showed that the tensile-strength, elongation and bacteriostasis performance of SEBS/TiO2 nano-composites increased firstly and then reduced with increase of surface modifier.And the tensile-strength, elongation and yellow index of SEBS/TiO2 nano-composites rose with increase of content of TiO2.Expecially, when the amount of surface modifier and the nano-TiO2 are 4%, the yellow index of SEBS/TiO2 nanocomposites can reach a maxium of 27, the antibacterial properties of the material is best at this time, it also can achieve very good mechanical properties.
-
Key words:
- SEBS /
- titanium dioxide /
- composites /
- surface modifier /
- mechanical property /
- yellow index
-

计量
- 文章访问数: 62
- HTML全文浏览量: 14
- PDF下载量: 1
- 被引次数: 0