高压锅炉管用钢P12的洁净度分析

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名

邮箱

手机号码

标题

留言内容

验证码

Analysis of Cleanliness of P12 High-pressure Boiler Steel

1. School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China;
2. Zhongyuan Special Steel Co., Ltd., Jiyuan 454685, Henan, China

摘要: 通过对EAF-LF-VD-MC工艺生产P12各工艺环节系统取样，采用多种分析方法分析夹杂物的形貌、尺寸、数量及组成，系统研究了P12生产过程中洁净度演变规律。研究结果表明，在精炼环节，钢中T[O]和显微夹杂分别下降51.2%、50.8%；VD处理后到锻材中，钢液增氮率为54.2%，钢液二次氧化较为显著；锻材中T[O]、显微夹杂和大型夹杂数量平均值分别为20×10^-6、6.19个/mm²、0.35 mg/kg，达到了较高水平。
- 高压锅炉管用钢 /
- P12 /
- 夹杂物 /
- 洁净度 /
- 模铸
Abstract: The cleanliness of P12 steel produced with EAF-LF-VD-MC process was studied systematically by sampling in various process stages in the production and with multiple analyzing techniques investigating the shape,size,quantity and component of inclusions.The results indicate that,in the refining process,T[O] and microinclusions in steel reduce 51.2 percents and 50.8 percents respectively.After VD treatment,average nitrogen increase rate of molten steel is 54.2 percents right to forging ingot and secondary oxidation of molten steel is rather noticeable.The average amount of oxygen,microinclusions and large inclusions are 20×10^-6,6.19 per square millimeter and 0.35mg/kg respectively,reaching rather high levels.
- high-pressure boiler steel /
- P12 /
- inclusions /
- cleanliness /
- mold casting